AUTONET TV

Why Is My Check Engine Light On?

Posted September 29, 2019 12:20 PM

The Check Engine Light strikes fear into the hearts of some Center Line drivers, and is totally ignored by just as many. Just what it means is a mystery to most people.


Let's get the urgency issues out of the way first. If your Check Engine light is flashing, that means that something is wrong that could cause engine damage. Naturally, you need to get that taken care of right away. If your check engine light is flashing, you shouldn't drive at high speeds, tow or haul heavy loads. Take it easy all the way to your Center Line service center.

drive

If the light is glowing steadily, you should keep an eye on it for a day or two. If the light doesn't go off, schedule an appointment with your friendly and knowledgeable pros at Mac's Tire & Auto Repair to get it checked out.

Some more information on how the Check Engine light works may be helpful for Center Line drivers. Most of your engine functions are controlled by a computer, not surprisingly, called an engine control computer. The computer is able to adjust many engine parameters for environmental conditions, engine condition and even the way you drive.

In order to make these adjustments, the computer relies on a network of sensors to provide data. The computer knows the proper operating range for each sensor. When a sensor reading is out of range, the computer runs some tests and may turn on the vehicle's Check Engine light.

A simple example is a loose or missing gas cap. This may cause one of the sensors to read out of range. The computer doesn't know if it's a serious condition that caused the reading or just a loose gas cap, so it stores a trouble code and turns on the Check Engine light.

Now when you tighten up the gas cap, the sensor readings will be in the correct range. The computer will keep checking on the report for a day or two. Since a bad reading didn't come up again, it turns off the Check Engine light. The computer will also try to make adjustments to compensate for some readings. If it can do so, it'll then turn off the Check Engine light.

If the problem can't be resolved then the light will remain on, and you should get your vehicle looked at. Your friendly and knowledgeable pros at Mac's Tire & Auto Repair will plug a scanner into the on-board diagnostic port and read the trouble code stored in the computer. The trouble code will give the technician a starting place as he diagnoses the cause of the problem.

 

Mac's Tire & Auto Repair
6717 E 10 Mile Rd
Center Line, MI 48015
(586) 427-0111
http://www.macstireandauto.com



Search



Archive

April 2016 (16)
May 2016 (5)
June 2016 (4)
July 2016 (5)
August 2016 (4)
September 2016 (4)
October 2016 (5)
November 2016 (4)
December 2016 (4)
January 2017 (5)
February 2017 (3)
March 2017 (5)
April 2017 (4)
May 2017 (5)
June 2017 (4)
July 2017 (4)
August 2017 (5)
September 2017 (3)
October 2017 (5)
November 2017 (4)
December 2017 (3)
January 2018 (5)
February 2018 (4)
March 2018 (4)
April 2018 (4)
May 2018 (5)
June 2018 (4)
July 2018 (5)
August 2018 (4)
September 2018 (5)
October 2018 (4)
November 2018 (4)
December 2018 (4)
January 2019 (5)
February 2019 (4)
March 2019 (5)
April 2019 (4)
May 2019 (4)
June 2019 (5)
July 2019 (4)
August 2019 (4)
September 2019 (5)
October 2019 (2)

Categories

Air Conditioning (8)Alignment (7)Alternator (1)Auto Safety (2)Automotive News (2)Battery (4)Brakes (4)Cabin Air Filter (2)Check Engine Light (2)Cooling System (7)Dashboard (1)Diagnostics (5)Did You Know (1)Diesel Maintenance (1)Differential Service (2)Drive Train (5)Emergency Items (1)Engine Air Filter (1)Exhaust (4)Fluids (4)Fuel Economy (3)Fuel Saving Tip: Slow Down (1)Fuel System (19)Headlamps (1)Inspection (2)Keys to a long lasting vehicle (1)Maintenance (30)Monitoring System (2)Oil Change (1)Older Vehicles (2)Parts (6)Safety (3)Serpentine Belt (2)Service Intervals (6)Service Standards (8)Shocks & Struts (4)Steering (4)Suspension (2)Timing Belt (6)Tires and Wheels (23)Transmission (4)Warranty (1)What Customers Should Know (2)